Epson BrightLink Projectors | How to Calibrate the Finger Touch Feature

Last Updated on



Views: 0 , Video Rating: nan , View Time: 3:12 Minutes, # of Likes: 0, # of Disslikes: 0

Learn how to calibrate the Finger Touch feature on Epson BrightLink projectors.
touch calibration if you have a BrightLink equipped with finger touch capabilities you must calibrate the finger touch unit before using this feature before calibrating the finger touch you will first need to calibrate your projector if you have not done this already please watch the calibrating your BrightLink projector video first before starting the touch calibration process to start the touch calibration process use your projector remote to access the calibration menu press menu then use the arrow button on the remote to highlight extend it then choose easy interactive function next select touch unit setup from there make sure that the power to the touch unit is sent to on if it is not select power from the menu and press Enter turn power to on and press Enter next select angle adjustment and press Enter screen one of four will appear instructing you to place the calibration markers on the projected markers once the markers are in place press ENTER on the remote to begin the touch calibration process turn the dials on the finger-touch unit counterclockwise until they stop then slowly turn the dials to the right until the circular pointers move inside of the oval shape targets when both circles are inside the targets the circles will become solid at that point press ENTER on the remote next take the calibration markers and move them to the number one positions on the projected image when the circles become solid move the markers to the number two positions once those circles turn solid you can move on to step four by pressing enter on step 4 you will see a series of green dots around the perimeter of the image using your finger trace around the perimeter of the image until all of the dots disappear when you have completed this step the finger-touch module is completed and ready for finger-touch operation if for any reason the touch function is not accurate you may also manually calibrate the touch module to do so go back to the touch unit setup menu and select touch calibration as like calibrating the Pens you will see a green circle in the upper left corner of the projected image using your finger touch and hold the first circle until it disappears a second circle will appear directly below it touch and hold the second circle until it disappears in a similar way touch and hold all of the circles one at a time until they have all disappeared when you have touched all 16 points the manual calibration process is completed and you are ready to use the touch features of your BrightLink 595 wi

Epson BrightLink Projectors | How to Calibrate the Finger Touch Feature

Leave a Comment